Date and time] setting date and time, Date and time] setting date and time -8, P. 5-8 – Canon VB-M700F User Manual
Page 52
5
-8
Current Date and Time
[Date], [Time]
The date and time currently set in the camera are
shown.
Setting
1
[Setting Method]
Select from [Set manually], [Synchronize with NTP
server], [Synchronize with NTP broadcast],
[Synchronize with computer time].
2
[Date], [Time]
Set the following according to the selection made in
[Setting Method].
[Set manually] month/day>, and the time in 24-hour format in the order day and time). Example: To specify 1:23:04 pm, 23 August 2011, enter “2011/08/23” and “13:23:04.” [Synchronize with NTP server] The camera will synchronize with the NTP server time. Enter the IP address or host name of the NTP server. [Synchronize with NTP broadcast] time. The camera will synchronize time with NTP broadcasts received from the NTP server. [Synchronize with computer time] of the computer currently accessing the camera. The time zone will also be selected automatically. 3 [Time Zone] Select from the list the appropriate time difference from the Greenwich Mean Time. Note • If [Synchronize with computer time] is selected, after clicking [Apply], [Setting Method] will change to [Set manually]. • If [Synchronize with NTP server] is selected and the IP address of the NTP server is incorrect or a connection with the NTP • The camera's NTP broadcast mode does not support IPv6. • If the [Time Zone] setting is changed, the date and time display will update automatically according to the specified [Date and Time] Setting Date and Time The following can be set here. • Current Date and Time The date and time set in the camera is shown. • Setting Select the date and time setting method and time zone for the camera.
Set the desired date and time. The date is set by
The camera will synchronize with the NTP server
The camera will synchronize with the date and time
server cannot otherwise be established, the date and time will
not be changed.
time zone.