beautypg.com

P. 5-17) – Canon VB-M700F User Manual

Page 61

background image

5

-17

5

S

etting Page

Image Server

1

[Maximum Number of Clients]
Set the maximum number of clients that can be

connected to the camera at the same time. Up to 30

clients can be set.

If 0 is set, connection is prohibited except for the

Administrator.

2

[Camera Control Queue Length]

Set the maximum queue length for clients requesting

camera control privilege from the viewer. The maximum

number is 30. Enter an integer from 0 to 30. If 0 is set,

camera control is prohibited except for the

Administrator.

3

[Maximum Connection Time (sec.)]
Set the time in seconds during which an individual

client can connect to the camera. The maximum

number is 65535. Enter an integer from 0 to 65535. If 0

is set, the connection time becomes unlimited.

4

[Camera Control Time (sec.)]
Set the maximum time during which the viewer can

control the camera. The maximum number is 3600.

Enter an integer from 1 to 3600.

Audio Server

1

[Audio Transmission from the Camera]
When [Enable] is selected, the audio input through the

microphone attached to the camera can be transmitted

to the VB-M700/600 Viewer.

2

[Input Volume]
Set the volume of input for the microphone connected

to the camera in the range of 1 to 100. The greater the

value, the larger the input volume becomes.

3

[Voice Activity Detection]

If [Enable] is selected, the audio transmission is

stopped temporarily when no audio is output. This way,

the load of the applicable network can be reduced.

4

[Audio Reception from Viewer]
If [Enable] is selected, the audio received from the

bundled RM-Lite Viewer can be output from the

speaker with amplifier connected to the camera.

5

[Output Volume]
Set the volume of output for the speaker connected to

the camera in the range of 1 to 100. The greater the

value, the larger the output volume becomes.

6

[Echo Canceller]

If [Enable] is selected, echo between the microphone

and speaker is suppressed.

7

[Audio Input]
Set the microphone input. Select [Line In], [Microphone

In (dynamic microphone)] or[Microphone In

(condenser microphone)].

[Server]
Setting the Image Server, Audio Server and HTTP Server

The following can be set here.

• Image Server

Set the image transmission from the camera.

• Audio Server

Set the audio transmission/reception.

• HTTP Server

Set the authentication method, HTTP port and

web page delivery.

• Audio Transmission
• Input Volume
• Voice Activity Detection
• Echo Canceller

• Audio Reception
• Output Volume

This manual is related to the following products: