Canon VB-M700F - Manual (Page 123)

List of Log Messages
8
-13
8
Appen
dix
B203 Audio message send error [info]
B204 Audio message reception failure [info]
B301 Audio device error [err]
B401 Audio device initialization failed [err]
B402 Audio server initialization failed [err]
B403 Settings change failed [err]
Description audio message send error %1 [%2] (B203)
%1 Message type
%2 Error number
Meaning The audio message could not be sent.
Description audio message recv error [%1:%2] (B204)
%1 Error notification number
%2 Cause of error
Meaning The audio message could not be received.
Description cannot use audio device for %1 [%2:%3] (B301)
%1 Transmission/reception type (rx | tx)
%2 Error handling (open | write | flush)
%3 Error number
Meaning An audio device error was detected.
Countermeasure If the error is not reset automatically, arrange for servicing.
Description audio device initialization error [%1] (B401)
%1 Error number
Meaning The audio device could not be initialized. The audio server stops.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description audio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be initialized. The audio server stops.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated. The audio server stops.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.