Canon VB-M700F - Manual (Page 34)

3
-4
The camera specification file will be loaded and
camera names listed will be displayed under [Camera
List].
Note
• The [Select Camera] dialog box will remain open unless the
Camera Angle Setting Tool is shut down or the X at the top
right of the dialog box is clicked.
• The camera list is discarded when the Camera Angle Setting
Tool is shut down. Load the camera specification file the next
time you launch the Camera Angle Setting Tool.
„ Connecting to the Camera
From the camera list, select the camera to connect to and
click [Connect].
„ Connecting to the Next Camera on the List
Click [Next] to disconnect the camera currently
connected and connect to the next camera on the list.
Note
In [Detailed Information], information for the camera selected in
the camera list is displayed.
Disconnecting from the Camera, Shutting
Down
Camera list
1 Click [Disconnect] from the [File] menu to disconnect
the currently connected camera.
2 Click [Exit] from the [File] menu to shut down the
Camera Angle Setting Tool.
Important
You must set Intelligent Function detection areas and privacy
masks again after changing settings in the Camera Angle
Setting Tool.
Camera to be
connected next