NORD Drivesystems BU0020 - Manual (Page 79)

7 Data transmission
BU 0020 GB-2612 79
Both setpoints are transferred as whole numbers in the range -32768 to 32767. The value 16384
(4000 HEX) corresponds to 100%. The value C000 HEX is equal to
–100%, so that setpoints in the
range –200% to +200% can be transferred. A setpoint of 100% corresponds to the respective nominal
value:
Setting 100% is equal to
Off
Setpoint frequency, actual frequency PID, actual
frequency PID limited, actual frequency PID monitored,
frequency addition, frequency subtraction, maximum
frequency Maximum frequency
Torque current limit Torque current limit (P112)
Current limit Inverter rated current
Servo mode torque Rated torque
Torque precontrol Torque precontrol (P214)
In addition, posicon control bits can also be transferred here (see Setpoint 1)
Pos: 132 /Anleitungen/Bussysteme/6. Datenübertragung/Istwert 1 (IW1) @ 1\mod_1336391486983_388.docx @ 25591 @ 3 @ 1