NORD Drivesystems BU0020 - Manual (Page 61)

6 Parameterisation
BU 0020 GB-2612 61
6.2 BUS Parameters SK 5xxE
Note
The SK 54xE frequency inverter can administer 5 setpoint or actual values. However,
the Profibus bus system can only process setpoint or actual values 1 ... 3 (PPO1 ...
PPO4).
Pos: 93 /Anleitungen/5. Parametrierung/5.5 Steuerklemmen @ 0\mod_1327678262854_388.docx @ 9027 @ 3 @ 1
6.2.1 Control terminals
Parameter
{factory setting}
Setting value / Description / Note Device Supervisor
Parameter
set
Pos: 94 /Anleitungen/5. Parametrierung/Parameter/P400-P499/Parameter P480 – Funktion Bus I/O In Bits @ 0\mod_1328002641156_388.docx @ 10779 @ @ 1
P480 [-01]
...
[-12]
Function BusIO In Bits
(Function Bus I/O In Bits)
S
0 ... 74
{ all 0 }
The Bus I/O In Bits are perceived as digital inputs. They can be set to the same functions
(P420...425).
In order to use this function, one of the bus setpoints (P546, P547, P548) must be set to >Bus I/O
In Bits 0-7 <. The required function must then be assigned to the relevant bit.
With the SK 54xE in association with IO extension modules (e.g. SK TU4-IOE) these I/O bits can
also process their input signals.
[-01] = Bus I/O In Bit 0 (or SK54xE and above: + DI1 of the second SK xU4-IOE)
[-02] = Bus I/O In Bit 1 (or SK54xE and above: + DI2 of the second SK xU4-IOE)
[-03] = Bus I/O In Bit 2 (or SK54xE and above: + DI3 of the second SK xU4-IOE)
[-04] = Bus I/O In Bit 3 (or SK54xE and above: + DI4 of the second SK xU4-IOE)
[-05] = Bus I/O In Bit 4 (or SK54xE and above: + DI1 of the first SK xU4-IOE)
[-06] = Bus I/O In Bit 5 (or SK54xE and above: + DI2 of the first SK xU4-IOE)
[-07] = Bus I/O In Bit 6 (or SK54xE and above: + DI3 of the first SK xU4-IOE)
[-08] = Bus I/O In Bit 7 (or SK54xE and above: + DI4 of the first SK xU4-IOE)
[-09] = Flag 1
[-10] = Flag 2
[-11] = Bit 8 BUS control word
[-12] = Bit 9 BUS control word
The possible functions for the Bus In Bits can be found in the table of functions for the digital
inputs P420...425.
For further details, please refer to the manual for the AS interface, BU 0090.
Pos: 95 /Anleitungen/5. Parametrierung/Parameter/P400-P499/Parameter P481 – Funktion Bus I/O Out Bits @ 0\mod_1328002703095_388.docx @ 10802 @ @ 1