NORD Drivesystems BU0020 - Manual (Page 35)

2 Modules
BU 0020 GB-2612 35
No meaning
1 Assembly step 1
1a Push on the screw cap
1b Sealing plugs
1c Cable gland
1d Sealing ring (flat)
1e Cover
2 Assembly step 2
Put on the flat seal for the cover
3 Assembly step 3

Connect the cable shield

Connect the conductors
4 Assembly step 4
Push on the cover and place it on the M4
threaded studs
5 Assembly step 5
5a Screw on the cover with 4 contact
washers
5b and 4x M4 nuts
Torque 2.5 Nm ± 20%!
6 Assembly step 6

Screw in the cable gland Torque 2 Nm
± 20%

Press in the sealing plugs (if present)

Screw on the protective cap
 Torque 1.5 Nm± 20%
Pos: 45 /Anleitungen/Bussysteme/2. Baugruppen/Montage der SK TU2-Technologiebox @ 1\mod_1335440910321_388.docx @ 22864 @ 35 @ 1