Airedale DeltaChill FreeCool 110kW - 1080kW - Manual (Page 73)

Chillers DELTACHILL
™
Chillers
73
Technical Manual :7022932_V1.9_11/2013
Electrical Data Regular Quiet Continued
ELECTRICAL DATA DCC042DR-10BSS0 DCC043DR-08BST0 DCC045DR-10BST0
Unit Data
Nominal Run Amps (1) A 301.4 306.1 314.7
Maximum Start Amps (2) A 518.3 578.6 587.2
Recommended Mains Fuse Size A 315 355 355
Mains Supply VAC 400 V 3 PH 50 Hz
Max Mains Incoming Cable Size mm² Direct to Bus Bar
Recommended Permanent Fuse Size A 16 16 16
Permanent Supply VAC 230 V 1 PH 50 Hz
Max Permanent Incoming Cable Size mm² 4 mm² terminals
Control Circuit VAC 24V/230VAC
Evaporator
Pad Heater Rating W 100 100 100
External Trace Heating
Available (fitted by others) W 500 500 500
Condenser Fan - Per Fan (AC)
Quantity 10 8 10
Full Load Amps A 4.3 4.3 4.3
Locked Rotor Amps A 15 15 15
Motor Rating kW 2 2 2
Condenser Fan - Per Fan (EC)
Quantity 10 8 10
Full Load Amps A 3.9 3.9 3.9
Locked Rotor Amps A N/A N/A N/A
Motor Rating kW 2.56 2.56 2.56
Compressor - Per Compressor
Nominal Run Amps A 43.1 / 43.1 47.5 / 43.1 47.5 / 43.1
Quantity 3 + 3 3 + 3 3 + 3
Motor Rating kW 24.0 / 24.0 28.2 / 24.0 28.2 / 24.0
Sump Heater Rating W 75 130 + 75 130 + 75
Start Amps (2) A 260 / 260 320 / 260 320 / 260
Type Of Start Direct on line
OPTIONAL EXTRAS
Power Factor Correction
Circuit 1 Comp RLA (PFC) 36.5 42.8 42.8
Circuit 2 Comp RLA (PFC) 36.5 36.5 36.5
Nominal Run Amps A 261.9 272.2 280.8
Maximum Start Amps A 485.4 549.4 558.0
Compressor Nominal Run Amps A 36.5 / 36.5 42.8 / 36.5 42.8 / 36.5
Recommended Mains Fuse Size A 315 355 355
Electronic Soft-start
Nominal Run Amps A 301.4 306.1 314.7
Maximum Start Amps A 414.3 403.1 411.7
Recommended Mains Fuse A 315 355 355
Power Factor Correction & Electronic Soft Start
Nominal Run Amps A 261.9 272.2 280.8
Maximum Start Amps A 381.4 378.6 387.2
Compressor Nominal Run Amps A 36.5 / 36.5 42.8 / 36.5 42.8 / 36.5
Recommended Mains Fuse Size A 315 355 355
Standard Head Pump (Single or Run/Standby)
Pump Full Load Amps A 12 12 12
Unit Nominal Run Amps A 313.4 318.1 326.7
Recommended Mains Fuse Size A 355 355 355
Motor Rating kW 5.5 5.5 5.5
Larger Head Pump (Single or Run/Standby)
Pump Full Load Amps A 14 14 14
Unit Nominal Run Amps A 315.4 320.1 328.7
Recommended Mains Fuse Size A 355 355 355
Motor Rating kW 7.5 7.5 7.5
Standard Head Inverter Pump (Single or Run/Standby)
Pump Full Load Amps A 11.2 11.2 11.2
Unit Nominal Run Amps A 312.6 317.3 325.9
Recommended Mains Fuse Size A 355 355 355
Motor Rating kW 5.5 5.5 5.5
Larger Head Inverter Pump (Single or Run/Standby)
Pump Full Load Amps A 11.2 14.8 14.8
Unit Nominal Run Amps A 312.6 320.9 329.5
Recommended Mains Fuse Size A 355 355 355
Motor Rating kW 5.5 7.5 7.5
(1) Based at 7.2°C Evap / 54.4°C Condensing, AC Standard Fans.
(2) Starting amps refers to the direct on line connections.