West Control Solutions N8840 - Manual (Page 72)

7.3.4 Programmer display
Programmer is in reset and the internal controller set-point
is effective. Segment or program number and OFF are
displayed (configurable with 8800/8840 Configurator:
Configuration
r
Other
r
PDis3).
Programmer running (run LED is lit). Segment or program
number, segment type ( / rising; \ falling; - hold) and
program/segment rest time or runtime are displayed
(configurable with 8800/8840 Configurator: Configuration
r
Other
r
PDis3).
Program end was reached. The set-point defined in the last
segment is effective. Segment or program number and End
are displayed (configurable with 8800/8840 Configurator:
Configuration
r
Other
r
PDis3).
Function key
è
was used to switch over to the controller.
The instantaneously effective correcting variable is
displayed.
Programmer level
Programmer description 72 8840 profiler
SP.2 run SP.E
para
func
Ada
Err
01/12:30
SP.2 run SP.E
para
func
Ada
Err
01 OFF
SP.2 run SP.E
para
func
Ada
Err
16 End
SP.2 run SP.E
para
func
Ada
Err
ыыы_____