Thermo Fisher Scientific CyberComm 6000 for CyberScan Series 6000 - Manual (Page 29)

Instruction Manual CyberComm 6000
23
3. Standardization
3.1 About Standardization
It is recommended that you standardize CyberComm before you make any
measurements. CyberComm provides you flexibility in Standardization. You can
either perform a fresh standardization or import existing standardization data from the
CyberScan meter or re-use standardization data of other users who have already
performed standardization in the CyberComm. At any time, you can switch your
standardization without losing the previous standardization data.
In CyberComm, standardization is available when you are in single-channel mode.
Available options in standardization:
ƒ Select existing standardization data of the meter and proceed with
measurement
ƒ Select existing standardization data of CyberComm and proceed with
measurement
ƒ New standardization using an existing electrode
ƒ Temperature standardization
Additional options:
ƒ Add a new electrode to the project
ƒ Remove an existing electrode from the project
ƒ Clear standardization from an electrode
ƒ Compare electrode characteristics
Note: If you wish to use existing standardization data of the meter, you
need to import standardization data from the meter. You will see
‘DeviceJob’ under Projects tab once you synchronized data. See page
12 for more details on importing standardization data.