Thermo Fisher Scientific CyberComm 6000 for CyberScan Series 6000 - Manual (Page 20)

Instruction Manual CyberComm 6000
14
4. When the synchronization (import) is completed, system creates a new project
named ‘DeviceJob’ and attaches the imported device data to that project. (Figure
14). If there is ‘DeviceJob’ already available in the project list, then the imported
data is automatically copied to it.
Figure 14 : DeviceJob
5. Repeat step 2 & 3 selecting rest of the two sub menus to import all the device
data.
Note: The imported standardization data is available for other projects
you may create for the same CyberScan meter. Other users who use the
same CyberScan meter can access the standardization data you
imported from the meter. Thus, users do not need to calibrate the meter
for each project they create.