beautypg.com

Preparation, Inserting the batteries, Attaching the electrode holder onto the meter – Thermo Fisher Scientific CyberScan CON 10/CON 100/CON 200 User Manual

Page 8: 3 p r e pa r at i o n

background image

5

3 P R E PA R AT I O N

3.1

Inserting the Batteries

Four AAA batteries are included with your meter.

1.

Use a Philips screwdriver to remove the two screws holding the battery cover. See Figure

3 below.

2.

Lift meter stand to expose battery cover. Remove battery cover.

3.

Insert batteries. Follow the diagram inside the cover for correct polarity.

4.

Replace the battery cover into its original position using the two screws removed earlier.

Remove Screws

Figure 3: Back panel of meter showing battery compartment