Thermo Fisher Scientific CyberScan CON 10/CON 100/CON 200 - Manual (Page 33)

30
8.3 Program 2: Instruments Setup
8.3.1 P2.0: Ready selection
Activation of the READY option ensures that the READY
indicator is displayed when the electrode reading
stabilizes. READY options can be switched on or off by
pressing the MI/ ! or MR/ " key as indicated by ON or
OFF in the display, followed by ENTER/RANGE key.
Under factory default, the option is ON.
ON
READY annunciator appears when variation is
within 1 LSD (Least Significant Digit)
OFF READY annunciator will not appear
8.3.2 P2.1: Auto-Off
To conserve the power, the meter has an AUTO-OFF
feature. Activation of the auto-off option will automatically
power off the instrument 20 minutes after the last key
selection. This feature is useful for conserving battery
power. If this feature is not required, it can be switched off
by using the MI/ ! or MR/ " key, and pressing
ENTER/RANGE key.
Under default condition, the option is activated.
ON
Meter switches off automatically 20
minutes after the last key operation
OFF
Meter will operate continuously until
switched off manually using the
ON/OFF key
Figure 26: READY option
Figure 27: Auto-Off option