Thermo Fisher Scientific CyberScan CON 10/CON 100/CON 200 - Manual (Page 38)

35
8.5 Program 4: Communication Setup (in CyberScan CON 200
only)
This program allows you to set up the instrument’s communication parameters of the
CyberScan CON 200 meter to enable proper communication with the printer or computer of
choice.
8.5.1 P4.0: Baud Rate
You can select a baud rate of 2.4, 4.8, 9.6 or 19.2 kbps
(kilo bits per second). Under default conditions, the baud
rate is set to 9.6 kbps (9600 bps).
1. From COND or TDS measurement mode, press
SET key.
2. Press ENTER/RANGE key until P4.0.
3. Use the MI/ ! or MR/ " key to change different baud
rate.
4. Press ENTER/RANGE key to confirm and continue
to set Parity in P4.1.
See figure 33.
Figure 33: The Baud Rate option