Spectrex 40/40R - Single IR Flame Detector - Manual (Page 57)

TM 40/40R, Rev (4) November 2010
Troubleshooting 45
A.4 Mechanical Specifications
Enclosure Stainless Steel 316
or
Aluminum, heavy duty copper free (less than-1%),
red epoxy enamel finish
Hazardous Area
Approvals
• FM, CSA
Class I Div. 1 Groups B, C and D;
Class II/III Div. 1 Groups E, F and G.
• ATEX, IECEx ; EX II 2 GD, EExde IIB + H2 T5
(75°C), T4 (85°C)
Water and Dust
Tight
• NEMA 250 type 6p.
• IP 66 and IP 67 per EN 60529
Electronic
Modules
Conformal coated
Electrical
Connection
(two entries)
• ¾" - 14NPT conduit
or
• M25 x 1.5
A.5 Dimensions
4" x 4.6" x 6.18" (101.6 x 117 x 157 mm)
A.6 Weight
Stainless Steel: 6.1 lb. (2.8 kg)
Aluminium: 2.8 lb. (1.3 kg)
A.7 Environmental Specifications
The SharpEye 40/40R is designed to withstand harsh environmental
conditions.
High Temperature
• Designed to meet MIL-STD-810C, method
501.1 procedure II
• Operating temperature: +167°F (+75 °C)
• Storage temperature: +185 °F (+85 °C)
Low Temperature • Designed to meet MIL-STD-810C, method
502.1, procedure I
• Operating temperature: -57°F (-50°C)
• Storage temperature: -65°F (-55°C)
Humidity • Designed to meet MIL-STD-810C, method
507.1, procedure IV
• Relative humidity of up to 95% for the
operational temperature range