Spectrex 40/40R - Single IR Flame Detector - Manual (Page 35)

TM 40/40R, Rev (4) November 2010
Installing the Tilt Mount (part no. 40/40-001) 23
2.6.1 Tilt Mount Specifications
Table 13: USA Version
Item Qty Type Location
Tilt Mount 1 40/40-001
Screw 4 ¼" 20 UNC x ¾" Detector – Holding plate
Spring Washer 4 No. ¼" Detector - Holding plate
Table 14: European Version
Item Qty Type Location
Tilt Mount 1 40/40-001
Screw 4 M6 x 1 x 20 mm Detector – Holding plate
Spring Washer 4 M6 Detector - Holding plate
2.6.2 Tilt Mount Assembly
Figure 4 shows the Tilt Mount Assembly.
Tilt Mount
Tilt Holding Plate
Horizontal
Locking Screw
Vertical Locking
Screw
Detector Holding
Plate
Figure 4: Tilt Mount Assembly