SHIMPO DT-365E - Manual (Page 26)

26
7 Troubleshooting
Symptoms Factors Causes Solution
When the power is turned ON,
"LLLLLL" is indicated, and no
emission occurs.
The battery voltage is
low.
The battery is not
charged.
Charge the battery.
Though the battery is fully
charged, "LLLLLL" is soon
indicated on the display.
The battery capacity is
low.
Short battery life
Battery malfunction
Charging circuit malfunction
Replace the battery.
If the problem has not been
solved after replacing the
battery, ask for repair.
The charging lamp does not
light up when the AC adapter is
connected.
The power does not
reach the main unit.
The AC adapter is not
connected.
Check the connection.
AC adapter malfunction Ask for repair.
Charging cannot be
completed, and the charging
lamp remains ON.
Charging failed.
Short battery life
Battery malfunction
Charging circuit malfunction
Replace the battery.
If the problem has not been
solved after replacing the
battery, ask for repair.
Emission occurs inconsistently.
Emission sometimes stops.
Internal circuit
malfunction
Internal circuit
malfunction
Ask for repair.
Display or emission does not
change by turning the dial.
Internal circuit
malfunction
Internal circuit
malfunction
Ask for repair.
Information appears on the
digital display, but no emission
occurs.
Internal circuit
malfunction
Internal circuit
malfunction
Ask for repair.
Nothing is indicated on the
display, and no emission
occurs.
Internal circuit
malfunction
Internal circuit
malfunction
Ask for repair.