SHIMPO DT-365E User Manual
Page 21

21
4.5.3 Trigger edge setting (Function mode 2)
In the external trigger mode, in which the edge of the external pulse triggers emission, the rising
edge or falling edge, can be set.
When the trigger edge is set to "L-H"
External trigger pulse
(Pulse entered from an
external device to DT-365E)
Strobe emission
* Delay time (time based on the delay angle setting value)
*
*
*
When the trigger edge is set to "H-L"
Strobe emission
* Delay time (time based on the delay angle setting value)
*
*
*
External trigger pulse
(Pulse entered from an
external device to DT-365E)
Turn the dial to the CW direction to set the trigger edge to H-L (falling).
Turn the dial to the CCW direction to set the trigger edge to L-H (rising).
Operate the dial to stop the alternate display, and only the trigger edge setting value is indicated.
Operation
Display
Change the setting
value
INT
EXT
FPM
DUR
PHA
INT
EXT
FPM
DUR
PHA
Indicates alternately
INT
EXT
FPM
DUR
PHA
INT
EXT
FPM
DUR
PHA
* Previous setting value
Falling
Rising
CCW
CW
MODE
Go to function mode 3
INT
EXT
FPM
DUR
PHA
INT
EXT
FPM
DUR
PHA
Go to function mode 3
MODE