SHIMPO DT-365E - Manual (Page 22)

22
4.5.4 Auto emission stop time setting (Function mode 3)
This setting is used to stop emission automatically when no operation is performed for a certain
period of time.
The available setting time is within the range between 0 min and 120 min, which can be changed
by 1 minute.
When it is set to 0, the auto emission stop function is turned OFF, and emission is performed
continuously.
When emission is stopped by the auto emission stop function, use the key or dial operations to
restart emission.
Operation Display
Change the setting
value
INT EXT
FPM
DUR
PHA
INT EXT
FPM
DUR
PHA
Indicates alternately
INT EXT
FPM
DUR
PHA
* Previous setting value
CCW CW
INT EXT
FPM
DUR
PHA
MODE
Go to the emission
screen
INT EXT
FPM
DUR
PHA
MODE
INT EXT
FPM
DUR
PHA
Go to the emission screen
Display when emission is stopped by the auto emission stop function
INT EXT
FPM
DUR
PHA
INT EXT
FPM
DUR
PHA
Restart emission
Key or dial operations