Martel Electronics BetaGauge 3II - Manual (Page 77)

Advanced Display Modes 5-10
6. After you select the field instrument type, the main
linearization screen displays. Use this screen to
begin defining the expected low and high electrical
signal values of the field instrument as described in
the next procedure.
Defining the Expected Low/High Values
To define the expected low and high electrical signal
values of the field instrument, do the following:
1. After you define the field instrument type, the
following main linearization screen displays:
In the above example:
x = the channel number of the DC module,
yyyy = the current linearization mode of the DC
module channel.
2. Press the function key corresponding to the 
menu item, and the following screen displays:
3. Press the function key corresponding to %Scal and
the display screen prompts you for the field
instrument’s in/out low value. A sample screen is
shown below:
CHx Mode: yyyy
Std Eng Sqrt →
CHx Mode: yyyy
%Scal %Err →
CHx Instr: In/Out Lo