Martel Electronics BetaGauge 3II - Manual (Page 64)

4-9 User Preferences
2. Press the function key corresponding to the menu
item Sec to display the Set Second screen as shown
below:
3. Use the number keys on the keypad to enter a value
between 0 and 59 seconds, then press the ENTER
key to return to the Set time menu.
NOTE: If you attempt to enter a value outside this
range, an Invalid Entry message will
appear. To erase an existing entry or to correct a
mistake, use the CLR key to erase the character to
the left of the cursor.
4. To set values for minutes and hours, repeat steps 2
and 3, pressing the appropriate function keys.
NOTE: To set a pm time for the hours value, enter
the hour in 24-hour format. For example,
enter the value 15 to specify 3 p.m.
5. Press the CLR key to return to the Setup menu.
Formatting the Time
To specify whether you want the time to display in 12
or 24-hour format, do the following:
1. Use the Menu key to locate the Setup menu item
Format, then press the corresponding function key.
The lower portion of the LCD will appear similar
to the example shown below:
Set Second
Format Date time
dmy mdy ymd 12Hr