Martel Electronics BetaGauge 3II - Manual (Page 149)

Doc. Cal. Mode 7-8
Viewing the Test Points for a Specific Tag
To view the test points for a specific tag on the Tag
Status screen, do the following:
1. Specify the tag number associated with the test
points you want to view.
2. Press the function key corresponding to the menu
item TP to display the expected input and output
measurement for the first six test points of the
current tag. An example screen is shown below:
3. If there are additional test points you want to view,
press the function key corresponding to the PgDn
menu item to display the additional test points.
4. To return to the Tag Status screen, press the CLR
key.
NOTE: You can exit the SYS mode by pressing
the CLR key again.
Tag 2:
BG2 TAGS Tag 2
Inst. OUT: mA
Inst. IN:
PSI
Pt. Exp. IN Exp. OUT
Un 1 3.0000 4.0000
Un 2 6.0000 8.0000
Un 3 9.0000 12.000
Un 4 12.000 16.000
Un 5 15.000 20.000
Un 6 12.000 16.000
Test Points
PgDn