Martel Electronics BetaGauge 3II - Manual (Page 26)

1-11 General Description
Calib Menu
The Calib Menu contains the following menu items:
Menu
Item
Allows you to …
Main (Reserved for factory use.)
Info Specify details on who owns the calibrator and
view the version of firmware currently
installed. Refer to Section 4 for more
information.
Accessing the Menu Items
The menus and menu items appear at the bottom of the
LCD. When you first power up the calibrator, the
bottom of the display appears as shown below:
NOTE: The display automatically defaults to the Setup
menu and shows the first four Setup menu
items.
Procedure
To access the Setup menu and the Calib menu:
1. Make sure the power is on. The first four items on
the Setup menu display automatically.
2. To access the other Setup menu items, continue
pressing the Menu key. When you have viewed all
of the Setup menu items, the Calib menu appears.
3. To return to the Setup menu, press the Menu key
again.
Setup Menu CH1
Trip Unit Damp V/ma