KROHNE PTIFLEX 2200 FOUNDATION FIELDBUS - Manual (Page 4)

1
SAFETY INSTRUCTIONS
4
OPTIFLEX 2200 C
www.krohne.com 09/2013 - 4002573201 - AD FF OPTIFLEX 2200 R01 en
1.4 Software history
"Firmware revision" agrees with NAMUR NE 53. It is a series of numbers used to record the
revision status of embedded software (firmware) in electronic equipment assemblies. It gives
data on the type of changes made and the effect that changes have on compatibility. The table
that follows records the changes for devices that have the FOUNDATION™ fieldbus option.
Data about software revisions is shown in menu 1.1.0 IDENT. For more data refer to the
"Operation" chapter in the handbook. If it is not possible to refer to the device menu, record the
serial number of the device (given on the device nameplate) and speak to the supplier.
1.5 Nameplate
Release date Printed circuit assembly Firmware
revision Hardware
revision Changes and
compatibility Documentati
on
2013-09-03 Converter 1.08.01 4000342401k - AD FF
OPTIFLEX
2200 R01
Sensor 1.21.02 4000357001u
HMI (LCD display option) 1.10.00 4000487601o
Pactware DTM V1.0.1
Figure 1-1: Nameplate for a device with the FOUNDATION™ fieldbus option
1 Input voltage range / Basic current
2 Output or communication protocol option