KROHNE PTIFLEX 2200 FOUNDATION FIELDBUS - Manual (Page 37)

OPERATION
4
37
OPTIFLEX 2200 C
www.krohne.com 09/2013 - 4002573201 - AD FF OPTIFLEX 2200 R01 en
GRANT
Grant
RW Depending on the philosophy of the plant, the operator or a
higher level device (HLD) or a local operator's panel (LOP) in
the case of "Local", may turn on an item of the "Grant"
attribute - "Program, Tune, Alarm or Local".
Uninitialized
Setting:
Program / Tune / Alarm / Local / Operate
DENY
Deny
RW The deny attribute is provided for use by a monitoring
application in an interface device and may not be changed by
an operator.
Uninitialized
Setting:
Program denied / Tune denied / Alarm denied / Local denied /
Operate denied
HI_ALM HI_ALM HI_ALM HI_ALM
High Alarm High Alarm High Alarm High Alarm
The status for High Alarm and its associated time stamp.
For settings of the 5 sub-elements, refer to the
"Unacknowledged", "Alarm State", "Time Stamp", "Subcode"
and "Value" items that follow.
-
HI_HI_ALM HI_HI_ALM HI_HI_ALM HI_HI_ALM
High High Alarm High High Alarm High High Alarm High High Alarm
The status for High High Alarm and its associated time stamp.
For settings of the 5 sub-elements, refer to the
"Unacknowledged", "Alarm State", "Time Stamp", "Subcode"
and "Value" items that follow.
-
Settings of 5 sub-elements for the parameters "High Alarm" and "High High Alarm":
UNACKNOWLEDGED
Unacknowledged
RW Setting:
Uninitialized / Acknowledged / Unacknowledged
Uninitialized
ALARM_STATE
Alarm State
R Setting:
Uninitialized / Clear - reported / Clear - not reported / Active -
reported / Active - not reported
Uninitialized
TIME_STAMP
Time Stamp
R Setting:
MM / DD / YY (Month / Day / Year)
HH:MM:SS (Hour:Minute:Second)
Uninitialized
SUB_CODE
Subcode
R Setting:
Other/ Block Configuration / Link Configuration / Simulation
Active / Local Override / Device Fault State / Device
Maintenance / Input Failure / Output Failure / Memory
Failure / Lost Static Data / Lost NV Data / Readback Check /
Maintenance Needed / Power Up / Out Of Service
Other
VALUE
Float Value
R A numerical quantity entered by a user or calculated by the
algorithm.
0.0
HI_HI_LIM HI_HI_LIM HI_HI_LIM HI_HI_LIM
High High Limit High High Limit High High Limit High High Limit
RW The setting for High High Alarm in engineering units.
For the setting range, refer to the " x_y_LIM" item that
follows.
NaN
HI_HI_PRI HI_HI_PRI HI_HI_PRI HI_HI_PRI
High High Priority High High Priority High High Priority High High Priority
RW Priority of the High High Alarm.
For the setting range, refer to the " x_y_PRI" item that follows.
0
HI_LIM HI_LIM HI_LIM HI_LIM
High Limit High Limit High Limit High Limit
RW The setting for High Alarm in engineering units.
For the setting range, refer to the " x_y_LIM" item that
follows.
NaN
HI_PRI HI_PRI HI_PRI HI_PRI
High Priority High Priority High Priority High Priority
RW Priority of the High Alarm.
For the setting range, refer to the " x_y_PRI" item that follows.
0
Setting range for the parameters
"High High Limit" and "High
Limit":
x_y_LIM
x_y_Limit
-3.39 E38…+3.39 E38 / - INF (- infinite) / + INF (+ infinite)
Setting range for the parameters
"High High Priority" and "High
Priority":
x_y_PRI
x_y_Priority
Setting:
0...15
0
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value