AMT Datasouth AMTACCEL-5350 - Manual (Page 55)

User's Guide
Loading Paper 3-11
To reload the pin-feed paper, press the Form Feed button on the control
panel. The printer advances the paper to the first printable line.
To load a single sheet through the top paper papth, move the tractor
select indicator to the rear position ( ). Then, load the sheet in the usual
way (refer to Loading Single Sheets in this section).
To load pin-fed forms on models with bottom-feed tractors, move the
tractor select to the rear position ( ). Then, set the BIN parameter to
the Bottom setting. Refer to the Bottom-Feed Tractors appendix.
Unloading Pin-Fed Report Paper
To unload pin-fed report paper, tear off all printed pages that have exited
the printer and press the Park button on the control panel. Then, press
the Ready button to pause the printer and turn the Select-dial counter-
clockwise until the pin-fed paper is clear of the tractors.
Using Paper Park
With the paper park feature, reversing pin-fed report paper out of the
printer is quick and easy. Reloading paper is even easier.
To park pin-fed report paper, use the following procedure:
1. Tear off the last printed report page at the perforation.
2. Press the Paper Park button on the control panel. The printer reverse
feeds the paper until the leading edge of the first sheet is halfway
through the tractors.
User's Guide
Loading Paper 3-11
To reload the pin-feed paper, press the Form Feed button on the control
panel. The printer advances the paper to the first printable line.
To load a single sheet through the top paper papth, move the tractor
select indicator to the rear position ( ). Then, load the sheet in the usual
way (refer to Loading Single Sheets in this section).
To load pin-fed forms on models with bottom-feed tractors, move the
tractor select to the rear position ( ). Then, set the BIN parameter to
the Bottom setting. Refer to the Bottom-Feed Tractors appendix.
Unloading Pin-Fed Report Paper
To unload pin-fed report paper, tear off all printed pages that have exited
the printer and press the Park button on the control panel. Then, press
the Ready button to pause the printer and turn the Select-dial counter-
clockwise until the pin-fed paper is clear of the tractors.
Using Paper Park
With the paper park feature, reversing pin-fed report paper out of the
printer is quick and easy. Reloading paper is even easier.
To park pin-fed report paper, use the following procedure:
1. Tear off the last printed report page at the perforation.
2. Press the Paper Park button on the control panel. The printer reverse
feeds the paper until the leading edge of the first sheet is halfway
through the tractors.