Loading paper – AMT Datasouth AMTACCEL-5350 User Manual

Page 45

User's Guide

Loading Paper 3-1

Loading Paper

This section describes how to load various kinds of media into the
printer, including single sheets, pin-feed paper, multipart forms,
labels, and transparencies. If your printer has bottom-feed tractors,
refer to the Bottom-Feed Tractors appendix.

Choosing Paper

The printer can accommodate many different sizes and types of paper:

9 Media can be from 4 to 17 inches wide. Single sheets must be at

least 3 inches long and can be up to 0.015 inch thick.

9 Pin-feed paper must be from 3 to 16.5 inches wide including the

perforated edge strips, and can be up to 0.015 inch thick.

9 Multipart forms can have up to seven parts with carbons, and can be

up to 0.024 inch thick.

9 Labels and transparencies must also conform to the preceding

dimensions. Transparencies require an ink-absorbent coating and
paper backing sheets. You can purchase dot-matrix transparency
material at most computer and printer supply outlets.

Section