AMT Datasouth AMTACCEL-5350 User Manual
Page 134
User's Guide
6-18 Solving Problems
Table 6-1. Troubleshooting Guide––continued
Symptom
Probable Cause/Corrective Action
Printer leaves blank line after
9
9
9
9
9 AUTO LF mode on Setup
every print line.
menu is on; turn off mode.
9
9
9
9
9 LPI setting on Setup menu is
incorrect; check setting.
Carriage does not return to left
9
9
9
9
9 AUTO CR mode on Setup
margin before printing next line.
menu is off; turn on mode.
Printer only prints hexadecimal
9
9
9
9
9 HEX MODE on Setup menu
numbers.
is on; turn off mode.
Printing does not start at far left
9
9
9
9
9 LFT MAR setting on Setup
print position.
menu is incorrect; check setting.
Printer prints on pin-feed paper
9
9
9
9
9 Top-of-form is set incorrectly.
perforations.
Advance paper until first print
line is under guide lines on
print-line indicator and press
Set top of form button.
9
9
9
9
9 LENG setting on Setup menu
is incorrect for paper you are
using; check setting.
9
9
9
9
9 AUTO FF mode on Setup menu
is off; turn mode on.
Printer does not justify or center
9
9
9
9
9 RGT MAR setting on Setup
text with the corresponding mode
menu is incorrect; check setting.
turned on.
Printing starts too far down the
9
9
9
9
9 TOP MAR setting on Setup
page.
menu is incorrect; check setting.
Last line(s) on page print on top
9
9
9
9
9 LENG setting on Setup menu
of next page.
is incorrect; check setting.
User's Guide
6-18 Solving Problems
Table 6-1. Troubleshooting Guide––continued
Symptom
Probable Cause/Corrective Action
Printer leaves blank line after
9
9
9
9
9 AUTO LF mode on Setup
every print line.
menu is on; turn off mode.
9
9
9
9
9 LPI setting on Setup menu is
incorrect; check setting.
Carriage does not return to left
9
9
9
9
9 AUTO CR mode on Setup
margin before printing next line.
menu is off; turn on mode.
Printer only prints hexadecimal
9
9
9
9
9 HEX MODE on Setup menu
numbers.
is on; turn off mode.
Printing does not start at far left
9
9
9
9
9 LFT MAR setting on Setup
print position.
menu is incorrect; check setting.
Printer prints on pin-feed paper
9
9
9
9
9 Top-of-form is set incorrectly.
perforations.
Advance paper until first print
line is under guide lines on
print-line indicator and press
Set top of form button.
9
9
9
9
9 LENG setting on Setup menu
is incorrect for paper you are
using; check setting.
9
9
9
9
9 AUTO FF mode on Setup menu
is off; turn mode on.
Printer does not justify or center
9
9
9
9
9 RGT MAR setting on Setup
text with the corresponding mode
menu is incorrect; check setting.
turned on.
Printing starts too far down the
9
9
9
9
9 TOP MAR setting on Setup
page.
menu is incorrect; check setting.
Last line(s) on page print on top
9
9
9
9
9 LENG setting on Setup menu
of next page.
is incorrect; check setting.