AMT Datasouth AMTACCEL-5350 - Manual (Page 132)

User's Guide
6-16 Solving Problems
Table 6-1. Troubleshooting Guide––continued
Symptom Probable Cause/Corrective Action
Single sheets do not feed pro- 9 9 9 9 9 Push the form thickness
perly––continued. indicator toward the back of
the printer.
Some or all printer settings change 9 9 9 9 9 Application program is over-
before printing begins. riding your settings. Change
the printer setup in your appli-
cation program.
Pin-fed forms do not load properly. 9 9 9 9 9 Forms are not loaded properly.
Refer to Loading Paper section
for detailed procedure.
9 9 9 9 9 Wrong paper path selected.
Make sure rear or bottom paper
path is selected.
9 9 9 9 9 Push forms thickness
indicator towards front of
printer.
User's Guide
6-16 Solving Problems
Table 6-1. Troubleshooting Guide––continued
Symptom Probable Cause/Corrective Action
Single sheets do not feed pro- 9 9 9 9 9 Push the form thickness
perly––continued. indicator toward the back of
the printer.
Some or all printer settings change 9 9 9 9 9 Application program is over-
before printing begins. riding your settings. Change
the printer setup in your appli-
cation program.
Pin-fed forms do not load properly. 9 9 9 9 9 Forms are not loaded properly.
Refer to Loading Paper section
for detailed procedure.
9 9 9 9 9 Wrong paper path selected.
Make sure rear or bottom paper
path is selected.
9 9 9 9 9 Push forms thickness
indicator towards front of
printer.