KROHNE UFM 530 HT EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
UFM 530 HT
www.krohne.com 12/2013 - 4002393201- HB UFM 530 HT R02 en
1.1 Software history
1.2 Intended use
This product is designed for the measurement of liquids with high temperatures
up to 500°C / 932°F (Ex hazardous areas are limited to 440°C / 824°F).
1.3 Certifications
1.3.1 CE-certification
The device fulfils the statutory requirements of the following EC directives:
• Electromagnetic compatibility directive (EMC directive 2004/108/EC).
• Low voltage directive (73/23/EEC), product is designed in accordance with EN IEC 61010-1
first and second edition (safety requirements for electrical equipment for measurement,
control and laboratory use part 1).
• Pressure equipment directive (Module H of 97/23/EC, full quality assurance).
• ATEX directive (94/9/EC)
Release date Hardware Software Documentation
1990-05 2134721100-200 μP2: 90-05 MA UFM 530 HT R01
microcontroller: 01.13
DSP: 10.20
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
DANGER!
Local safety regulations shall be observed in combination with the measures special to this
product to avoid dangerous situations.