KROHNE UFM 530 HT EN - Manual (Page 21)

ELECTRICAL CONNECTIONS
4
21
UFM 530 HT
www.krohne.com 12/2013 - 4002393201- HB UFM 530 HT R02 en
4.3 Connection of signal cables
Connect the signal cable from the connection box of the UFS 500 HT sensor to the UFC 030
signal converter according to underneath drawings for the single beam and dual beam
construction.
Figure 4-2: Connection of the sensor cables for dual beam (left) and
single beam (right) building construction (sensor side)
Figure 4-3: Connection of the sensor cables, converter side