KROHNE UFM 530 HT EN - Manual (Page 37)

OPERATION
6
37
UFM 530 HT
www.krohne.com 12/2013 - 4002393201- HB UFM 530 HT R02 en
Operation menu
INFORMATION!
The functions in this menu are a subset of menu 3.00.00. They are selected in this menu as most
commonly used functions for a quick installation. Note: parameters set in these functions are
automatically set in both menus!
No. of menu Display text Setting/description and functions
1.01.00, FLOW
1.01.01 FULL SCALE Full-scale value for 100% volume flow rate.
1.01.02 ZERO VALUE Zero value.
1.01.03 ZERO CAL Zero calibration.
1.01.04 MASTER TC Master time constant.
1.01.05 LF CUTOFF Low-flow cut-off.
1.01.06 CUTOFF ON Cut-off active.
1.01.07 CUTOFF OFF Cut-off de-active.
1.02.00, DISPLAY
1.02.01 DISP FLOW Display of flow.
1.02.02 FUNCT TOT Function of totalizer.
1.02.03 TOTAL VOL Display of totalizer.
1.03.00, PULSE OUTP (Pulse output)
1.03.01 PULSE RATE Pulse frequency value for 100% scale.
1.03.02 PULSE/UNIT Pulse value per volume flow unit.
1.03.03 PULSE/UNIT Pulse value per energy unit.