KEPCO BHK-MG 40W (Half Rack) Series - Manual (Page 127)

BHK-MG 1/2 (OPR) 121313
B-1
APPENDIX B - SCPI COMMAND/QUERY DEFINITIONS
B.1 INTRODUCTION
This appendix defines the SCPI subsystem commands and queries used with the BHK-MG
40W Power Supply. Subsystem commands are defined in PAR. B.3 through B.90, arranged
Alphabetically in groups as they appear in the tree diagram, Figure 3-4. Table B-1 provides a
quick reference of all SCPI subsystem commands and queries used in the power supply.
TABLE B-1. SCPI SUBSYSTEM COMMAND/QUERY INDEX
COMMAND PAR. COMMAND PAR.
ABORt B.3 [SOUR:]VOLT[:LEV][:IMM][:AMP], ? B.48, B.49
CAL B.4 [SOUR:]VOLT:LIM[:HIGH], ? B.50, B.51
DISP:CONT, ? B.5, B.6 [SOUR:]VOLT:MODE[:HIGH], ? B.52, B.53
DISP:MODE, ? B.7, B.8 [SOUR:]VOLT:PROT:LEV, ? B.54, B.55
DISP:TEST, ? B.9, B.10 [SOUR:]VOLT[:LEV]:TRIG[:AMP]? B.56, B.57
INIT[:IMM] B.11 [SOUR:]FUNC:MODE? B.58
INIT:CONT, ? B.12, B.13 STAT:OPER:COND? B.59
INST:STAT, ? B.14, B.15 STAT:OPER:ENAB, ? B.60, B.61
[SOUR:]LIST:CLE B.16 STAT:OPER[:EVENT]? B.62
[SOUR:]LIST:COUN, ? B.17, B.18 STAT:PRES B.63
[SOUR:]LIST:COUN:SKIP, ? B.19, B.20 STAT:QUES[:EVENT]? B.64
[SOUR:]LIST:CURR, ? B.21, B.22 STAT:QUES:COND? B.65
[SOUR:]LIST:CURR:POIN? B.23 STAT:QUES:ENAB, ? B.66, B.67
[SOUR:]LIST:DIR, ? B.24, B.25 SYST:BEEP B.68
[SOUR:]LIST:DWEL, ? B.26, B.27 SYST:COMM:GPIB:ADDR, ? B.69, B.70
[SOUR:]LIST:DWEL:POIN? B.28 SYST:COMM:SER:BAUD, ? B.71, B.72
[SOUR:]LIST:QUER, ? B.29, B.30 SYST:COMM:SER:ECHO, ? B.73, B.74
[SOUR:]LIST:VOLT, ? B.31, B.32 SYST:COMM:SER:PACE, ? B.75, B.76
[SOUR:]LIST:VOLT:POIN? B.33 SYST:COMM:SER:PROM, ? B.77, B.78
MEAS:CURR? B.34 SYST:ERR? B.79
MEAS:VOLT? B.35 SYST:ERR:CODE? B.80, B.81
OUTP[:STAT], ? B.36, B.37 SYST:KLOCK, ? B.82, B.83
[SOUR:]CURR[:LEV][:IMM][:AMP], ? B.38, B.39 SYST:PASS B.84, B.85, B.86
[SOUR:]CURR:LIM[:HIGH], ? B.40, B.41 SYST:PASS:STAT? B.87
[SOUR:]CURR:MODE[:HIGH], ? B.42, B.43 SYST:SEC B.88
[SOUR:]CURR:PROT[:LEV], ? B.44, B.45 SYST:VERS? B.89
[SOUR:]CURR[:LEV]:TRIG[:AMP], ? B.46, B.47 TRIG:SOUR B.90