HT instruments SOLAR300N - Manual (Page 73)

SOLAR300 - SOLAR300N
EN - 71
The selection parameters of harmonic analysis require the preliminary selection of
voltages or currents inside General Parameter sub-level. The below error screen are
shown in these cases:
12/09/2006 – 16:55:10
RECORDING SETTINGS

-  Harmonics
+  Voltages
+  Currents
Voltage Anom.: 230V 6%-10%
Inrush current: 30A 1s fix
Flicker 
Error: no selected current
CLP/EXP TYPICAL SEL MODIFY
Fig. 125: No selected currents error screen
To solve the error situation of above screen select the “Current” inside “General
Parameter” sub-level (see § 5.4.2.7).
12/09/2006 – 16:55:10
RECORDING SETTINGS

-  Harmonics
+  Voltages
+  Currents
Voltage Anom.: 230V 6%-10%
Inrush current: 30A 1s fix
Flicker 
Error: no selected voltage
CLP/EXP PREDEF. SEL MODIFY
Fig. 126: No selected voltages error screen
To solve the error situation of above screen select the “Voltages” inside “General
Parameter” sub-level (see § 5.4.2.7).