HT instruments SOLAR300N - Manual (Page 14)

SOLAR300 - SOLAR300N
EN - 12
5.1. GENERAL SETTINGS
Fig. 8: MENU GENERAL screen - General settings section
This section permits to set the below control parameters:
 System language
 System Date/Hour
 Display brightness
 Protection password during recordings
 Key sound on pressure
 Auto Power OFF Enable/Disable
 Type of memory in which to save the recordings
 Perform “touch screen” display calibration (TOUCH)
Pressing ENTER key (or touch the relative icon at display). The below screen is shown by
meter:
Fig. 9: General Settings screen
5.1.1. Language selection
1. Move the cursor using arrows keys on field relative to “Language”, marked with blue
background.
2. Using F3 or F4 keys (or touch MOD(+) o MOD(-)) for selection of language choosing
among the different options.
3. Pressing SAVE or ENTER keys (or the smart icon ) to save the selected option and
confirm by “Ok”. This selected parameter will be present also the turning off of meter.
4. Pressing ESC key (or the smart icon ) to exit by screen without saving any modify.