HT instruments SOLAR300N User Manual

Page 139

SOLAR300 - SOLAR300N

EN - 137

The following keys are active on this page:

 The

F1 key (or the PAG item on the display) advances to the following page

of saved values.

 The

ESC key (or the smart icon on the display) to exit the function and go

back to the “Recording analysis” page (Fig. 181).

In this page, the following symbols are used:
Patt System total active power.
Preatt Total reactive power.
Papp Total apparent power.
Pf

Total power factor.

CosPhi

System total CosPhi.

CosPhi represents the theoretical limit value which
can be reached by the Power factor if all harmonics
are eliminated from the electrical system. For
dimensioning a power factor correction system,
reference is usually made to the CosPhi parameter
value.

Fig. 223: Page 2/5 of numeric values for three-phase 3-wire system

The following keys are active on this page:

 The

F1 key (or the PAG item on the display) advances to the following page

of saved values.

 The

ESC key (or the smart icon on the display) to exit the function and go

back to the “Recording analysis” page (Fig. 181).

In this page, the following symbols are used:
V1PE

Phase L1 - PE Voltage.

Phase L1 current.

Patt1

Phase L1 active power.

Preatt1 Phase L1 reactive power.
Papp1

Phase L1 apparent power.

Pf1

Phase L1 power factor.

CosPhi1 Cosine of the phase delay between the

Phase L1 voltage and current
fundamentals.

Fig. 224: Page 3/5 of numeric values for three-phase 3-wire system

This manual is related to the following products:

SOLAR300