GW Instek APS-1102 LabVIEW Driver User Manual - Manual (Page 38)

APS-1102 LabVIEW Driver Manual
2-30
Query ESE
When Read = True, outputs the service request enable register content set for the APS-1102.
When Read = False, “0” is set.
GW APS-1102 STB.vi
This returns the status byte register value. The response range is 0 to 178.
Query STB
This outputs the status byte register content set for the APS-1102.
GW APS-1102 TST.vi
This returns the self test results. In this device, “0” is always returned.
Query ESE
Always outputs “0” for this instrument.
GW APS-1102 WAI.vi
This is to prohibit the device from executing any subsequent command until all the operations are
completed.