GW Instek APS-1102 LabVIEW Driver User Manual - Manual (Page 11)

2.4 VISA Initialization
2-3
GW APS-1102 Sample Measuer.vi
The APS-1102 status can be checked continuously. Initialize and Close can be optionally executed.
 Output current  Apparent power  Power factor  Reactive power  Active power  Output
voltage
2.4 VISA Initialization
GW APS-1102 Initialize.vi
Performs initialization. Internally executes the APS-1102 Reset to return the various settings to
those at memory initialization.
IDCheck
Specify whether to check the ID. The default setting is “Yes (True)”.
Reset
Specify whether to execute resetting. The default setting is “Yes (True)”.
2.5 VISA Close
GW APS-1102 Close.vi
Stops using the APS-1102 operation vi and closes the VISA session.