GW Instek APS-1102 LabVIEW Driver User Manual - Manual (Page 29)

2.9 STATus Subsystem
2-21
 When the PTR filter is set to 1, WRER is set to 1 when WRCR changes from 0 to 1.
 When the NTR and PTR filters are both set to 1, WRER is set to 1 when WRCR changes.
 When the NTR and PTR filters are both set to 0, changes in WRCR are not propagated to WRER.
NTR set
This sets the NTR filter. The default setting is “0”.
PTR set
This sets the PTR filter. The default setting is “0”.
Ntransition
When Read = True, outputs the NTR filter contents set for the APS-1102. When Read =
False, “99999” is set.
Ptransition
When Read = True, outputs the PTR filter contents set for the APS-1102. When Read =
False, “99999” is set.