GW Instek APS-1102 LabVIEW Driver User Manual - Manual (Page 28)

APS-1102 LabVIEW Driver Manual
2-20
This sets the PTR filter. The default setting is “0”.
Ntransition
When Read = True, outputs the NTR filter contents set for the APS-1102. When Read =
False, “99999” is set.
Ptransition
When Read = True, outputs the PTR filter contents set for the APS-1102. When Read =
False, “99999” is set.
GW APS-1102 STAT Warn Enab.vi
This sets the warning event enable register. The setting range is 0 to 31999.
Warning Enable set
This sets the warning event enable register. The default setting is “0”.
Warning Enable
When Read = True, outputs the warning event enable register contents set for the APS-1102.
When Read = False, “99999” is set.
GW APS-1102 STAT Warn.vi
This returns the warning event register value. The response range is 0 to 31999.
Warning Enable
This outputs the warning event register contents.
GW APS-1102 STAT Warn Cond.vi
This returns the warning condition register (WRCR) value. The response range is 0 to 31999.
Warning Condition
This outputs the warning condition register value.
GW APS-1102 STAT Warn Ntr_Ptr.vi
This sets the warning transition filter (WRTF). The setting range is 0 to 31999.
 When the NTR filter is set to 1, WRER is set to 1 when WRCR changes from 1 to 0.