GW Instek APS-1102 LabVIEW Driver User Manual - Manual (Page 36)

APS-1102 LabVIEW Driver Manual
2-28
2.15 Common commands
GW APS-1102 CLS.vi
This clears the following registers:
 Standard event register
 Operation event register
 Warning event register
 Status byte
 Error queue
GW APS-1102 ESE.vi
This sets the standard event enable register. The setting range is 0 to 255.
ESE
This sets the standard event enable register. The default setting is “0”.
Query ESE
When Read = True, outputs the standard event enable register set for the APS-1102. When
Read = False, “999” is set.
GW APS-1102 ESR.vi
This returns the standard event register value. When ESR reads the standard event register, all bits
in the event register are cleared to 0. The response range is 0 to 255.
Query ESR
This outputs the standard event register set for the APS-1102.
GW APS-1102 IDN.vi
This returns model name, etc. The response message includes the “manufacturer, model name,
serial number, and firmware version”.
Query IDN
This outputs the model name and other information of the APS-1102.