9 status subsystem – GW Instek APS-1102 LabVIEW Driver User Manual User Manual
Page 27
2.9
STATus
Subsystem
2-19
2.9 STATus subsystem
GW APS-1102 STAT Cond.vi
This returns the operation condition register (OPCR). The response range is 0 to 20482.
OPCR
This outputs the operation condition register (OPCR).
GW APS-1102 STAT Enab.vi
This sets the operation event enable register (OPEE). The setting range is 0 to 20482.
OPEE set
This sets the operation event enable register (OPEE). The default setting is “0”.
OPEE
When Read = True, queries contents of the operation event enable register (OPEE) set for the
APS-1102. When Read = False, “99999” is set.
GW APS-1102 STAT Oper.vi
This returns the operation event register (OPER) value. The response range is 0 to 20482.
OPER
This outputs the operation event register (OPER) value.
GW APS-1102 STAT Ntr_Ptr.vi
This sets the operation transition filter (OPTF). The setting range is 0 to 20482.
When the NTR filter is set to 1, OPER is set to 1 when OPCR changes from 1 to 0.
When the PTR filter is set to 1, OPER is set to 1 when OPCR changes from 0 to 1.
When the NTR and PTR filters are both set to 1, OPER is set to 1 when OPCR changes.
When the NTR and PTR filters are both set to 0, changes in OPCR are not propagated to OPER.
NTR set
This sets the NTR filter. The default setting is “0”.
PTR set