Edwards Signaling 5541M-Y6 - Manual (Page 22)

P/N 3100471 ISSUE 3 PAGE 22
Display Illuminated LED's Description
None Displayed when the panel is in Standby
mode. If panel is set for Master, bottom
line will be as shown. If panel is set as
Satellite, bottom line on LCD display will
read "SATELLITE MODE." Panel is
performing supervision while this mes-
sage is being displayed.
None Displayed when the panel microphone
push to talk (PTT) button is depressed.
Message will return to normal upon
release.
Input LED (1, 2, 3, or 4) When alarm is activated using local
based on input key selected inputs 1, 2, 3 or 4 on the keypad, the
display will show "TONE OR VOICE
LABEL." Message will return to standby
message when cancel/alarm silence key
is pressed.
External Input Displayed when the telephone access
input is activated via contact closure from
the UL Listed telephone access module
interface. Message will return to standby
message upon contact release.
Chapter 5 - LCD Messages and Troubleshooting
5.1 - Normal Mode
When in normal mode, the following messages will be displayed on the LCD screen of the Millennium System Master. It should be noted
that the zones shown below will not appear if the panel is in satellite mode.