Cleaning the detector – Agilent Technologies G6600-90006 User Manual
Page 83
Operation and Maintenance Manual
83
Cleaning the Detector
You can clean the external housing of the Detector with a damp cloth using
water or non-abrasive cleaners. Turn off power to the Detector and disconnect
it from main power prior to cleaning. Do not spray liquids directly on the
Detector. Wipe dry with a clean, soft cloth.
No cleaning agents which could cause a hazard as a result of reaction with the
Burner unit are to be used in cleaning the instrument.
Contact Agilent to address concerns about the compatibility of specific
cleaning agents with the Burner unit.