Agilent Technologies G6600-90006 - Manual (Page 3)

Operation and Maintenance Manual 3
Warnings
English
WA R N I N G
This symbol on the instrument indicates that the user should refer to the man-
ual for operating instructions.
WA R N I N G
Any operation requiring access to the inside of the equipment, could result in
injury. To avoid potentially dangerous shock, disconnect from power supply
before opening the equipment.
WA R N I N G
For continued protection against fire hazard replace fuse with same type and
rating.
WA R N I N G
This symbol indicates that to comply with European Union Directive
2002/96/EC for waste electrical and electronic equipment (WEEE), the Ana-
lyzer should be disposed of separately from standard waste.
WA R N I N G
This is a safety Class I product. It must be wired to a mains supply with a protective
earthing ground incorporated into the power cord. Any interruption of the protective
conductor, inside or outside the equipment, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
WA R N I N G
If this instrument is used in a manner not specified by Agilent, the protection provided by
the instrument may be impaired.
WA R N I N G
High voltage is present in the instrument when the power cord is connected, even if the
main power switch is in the standby mode. To avoid potentially dangerous shock, discon-
nect the power cord before removing the side panels.