Step 5: install the dry compressed air or o, Supply – Agilent Technologies G6600-90006 User Manual
Page 57
Operation and Maintenance Manual
57
Step 5: Install the Dry Compressed Air or O
2
Supply
Connect a 1/8" OD Teflon (PFA) line fitted with a 1/8" brass Swagelok nut from
the AIR INLET at the rear of the Detector (see
) to a supply of dry
compressed air or oxygen. The air regulator located inside the front door of the
Detector should be set to approximately 3-6 psi.