Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 - Manual (Page 123)

Appendix A. Additional Information Archive of Data from the Database
A.6 Production Monitoring™ User Manual IM8001
Column Heading Description
Voltage
VAvgValue Hundreds of times per second, the Welding Power Source takes a
measurement of the arc voltage while the welder is active for this weld.
When the weld is complete, the power source averages those measurements
together. The VAvgValue column displays that average arc voltage value for
this weld.
VMinValue The VMinValue column is the lowest arc voltage measurement taken by the
Welding Power Source throughout the duration of this weld.
VMaxValue The VMaxValue column is the highest arc voltage measurement taken by the
Welding Power Source throughout the duration of this weld.
VLowPercent This value is the percentage of measurements taken during the weld that
were below the arc voltage limit set in the Weld Profile used to make this
weld.
VHighPercent This value is the percentage of measurements taken during the weld that
were above the arc voltage limit set in the Weld Profile that was used to
make this weld.
VLowLimit This column simply displays the low end of the voltage limit that was set in
the Weld Profile used to make the weld.
VHighLimit The value in this column is the high end of the voltage limit that was set in
the Weld Profile used to make the weld.
VIsLow If the average voltage used to make the weld fell below the low end of the
limit set for the Weld Profile that was used, the value in the VIsLow column
will be 1. Otherwise, the value will be 0.
VIsHigh If the average voltage used to make the weld was above the high end of the
limit set for the Weld Profile that was used, the value in the VIsHigh column
will be 1. Otherwise, the value will be 0.
VBaseUnits The VBaseUnits column simply displays the voltage units used in this weld
record. Typically, this is set to V for “volts”.
Current
CAvgValue Hundreds of times per second, the Welding Power Source takes a
measurement of the arc current while the welder is active for this weld.
When the weld is complete, the power source averages those measurements
together. The CAvgValue column displays that average arc current value for
this weld.
CMinValue The CMinValue column is the lowest arc current measurement taken by the
Welding Power Source throughout the duration of this weld.