Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 171)

Fabric OS Encryption Administrator’s Guide (KMIP) 153
53-1002747-02
Configuring the Brocade Encryption Switch key vault setup (SafeNet KeySecure)
3
Signing the KAC CSR using the Local CA
In this procedure, you are signing the KAC csr using the local CA of the KeySecure key vault from
the Web GUI, then downloading the signed certificate to the desktop.
1. Using a TLS connection, enter the IP address of the KeySecure key vault, for example,
https://10.38.145.10:9443.
The initial login page displays security and system summary information ( Figure 114 ).
FIGURE 114 KeySecure Management Console Home Page
2. From the KeySecure Management Console, select the Security tab, then select CAs & SSL
Certificates > Local CA.
The Certificate and CA Configuration page displays ( Figure 115 ).
FIGURE 115 KeySecure Certificate and CA Configuration page - Local CA sign request