Sterling RT - Manual (Page 27)

26 SV01H
Commissioning
Code Possible Settings
IMPORTANT
No. Name Default Selection
P Auto/Manual Control 0 0 Terminal Strip Control The reference is dictated by the settings and
state of the TB-13x terminals. If no AUTO
reference has been setup on the terminal strip
then reference control is dictated by P101.
1 Auto/Manual (CTRL button select) Allows the reference to be switched between
auto and manual using the CTRL pushbutton
on the drive keypad. If the CTRL pushbutton
has selected AUTO reference but no AUTO
reference has been setup on the terminal strip,
then reference control is dictated by P101.
2 Manual Control Only Reference is dictated by P101 regardless of
any AUTO source that may be selected by the
TB-13x terminals.
NOTE
P113 is applicable to SMV 15HP (11kW) and greater models only.