Yokogawa PC-Based MX100 - Manual (Page 56)

4-7
IM MW180-01E
Calibrator
1
2
3
4
5
App
Index
3. After making the connections according to the explanation given on the calibration
execution screen 1, click the Calibrate button.
For the 8-CH Medium Speed Analog Output module, after entering settings according to
the explanation given on the calibration execution screen 1, click the Calibrate button.
The figure below is an example of the 4-CH, High-Speed Universal Input Module.
Exp.Calibration execution screen 1
Start calibration
Return to the previous screen
Return to the Unit
Information screen
The figure below is an example of the 10-CH, Medium-Speed Universal Input
Module.
Exp. Calibration execution screen 1
Start calibration
Return to the previous screen
Return to the Unit Information screen
When the screw terminal block is connected,
substitute this with the screw terminal block
terminal wiring markings.
4.2 Calibration Procedure